LED R&D Lab(VD)
65
• Software for remote control of LED cabinet layout
LSM (LED Signage Manager)
Control PC
S-Box
Cabinet 1
Ethernet
Interface Gender
Vx1
Vx1
Vx1
HDBT
Vx1+Ethernet
Cabinet 2
Cabinet 3
Cabinet 4
1. Connect the PC to the S-Box via Ethernet.
2. Use a LAN cable to connect the S-Box to the Interface Gender.
3. Use an OCM cable to connect the Interface Gender to the first LED
cabinet.
4. Use OCM cables to connect the LED cabinets to one another in a
daisy-chain configuration.
7-1. PC-specific control software
7. Settings / How to Use
To Next Page
Loading...
