LED R&D Lab(VD)
67
• New Connection
1. To add connection information, use the Search button to
search for an IP address or manually enter an IP address.
If you click the Search button, the IP address for LSBs
available for connection on the same network appear.
Alternatively, manually enter the IP address if you know
the IP address for the target LSB for connection.
2. Click the Add button. Entered connection information is
added to the Setup and Connect settings. When S-Box’s
Secured Protocol option is On, Enter Device’s PIN and
click Add button.
3. The user can select an S-Box model type. Three model
types are available for selection:
Without Cabinet IP / With Cabinet IP(FHD) / With Cabinet IP(UHD).
7-1. PC-specific control software
LSM (LED Signage Manager)
7. Settings / How to Use
1
1
2
To Next Page
Loading...
