LED R&D Lab(VD)
71
1. Connection layout: Use the LSB output source section to adjust the
LED cabinet layout by rearranging cabinets.
2. Feature View: Provides the Edit button used to edit connection
information and the automatic LED cabinet alignment function.
3. Device Information/Setting View:
Shows LED cabinet information based on the following categories.
(i) Resolution: Resolution of the input source
(ii) Viewport: Width/height, video wall matrix, x/y coordinate settings
(iii) LED Signage Cabinet: X, Y positions of LED cabinets
4. Show ID: Select to cause each of all connected LED cabinets to
display their ID.
5. Save/apply or cancel settings
7-1. PC-specific control software
LSM (LED Signage Manager)
• Main Window-Edit Connection Layout Window
7. Settings / How to Use
1
2
4
3
To Next Page
Loading...
