LED R&D Lab(VD)
74
• Main Window-Connection Window - Device Information/Setting View
6. Cabinet Settings (※ Each menu can be supported for some specific models)
. LOD (LED Open Detection) : Check the number of LED Off
(Screen can be blinking when Recheck)
. Pixel RGB Data Reload : Load the Pixel Calibration data to the screen
. Pixel RGB Data Request : Download the calibration data via Cal Reader.
. OnScreen Display : On or Off for “No Video” OSD display on cabinet.
. LED Brightness : Adjust the screen brightness (0 ~ 10)
. Refresh Rate : Adjust refresh rate (Normal or High)
(Some models support only High)
. Software update : Update the cabinet software (Main sw, FPGA, Calibration data)
7-1. PC-specific control software
LSM (LED Signage Manager)
7. Settings / How to Use
※ Refer the module position of
LOD result for IER, IFR and IFJ
M1 M2
M3 M4
M5 M6
To Next Page
Loading...
