LED R&D Lab(VD)
82
• Supports mixed two-model installation
1. ※ IER and IER-F can be connected to the same port.
2. There is no connection order for IER and IER-F.
3. Combination is possible within an FHD screen
(the same I/G port).
4. Use the same firmware for both IER and IER-F.
5. Use the same firmware for both IFR and IFR-F.
IER
IER-F
7-1. PC-specific control software
LSM (LED Signage Manager)
※ For IER (IFR)/IER-F (IFR-F) mixed connections, the luminance is lower than the single specification when using the
Dynamic peaking function and Multi link HDR function
7. Settings / How to Use
To Next Page
Loading...
