●
HDMI UHD Color
Try Now
Allows you to set the HDMI UHD Color mode to On or Off for each HDMI connector on the TV.
When set to On, the TV optimises processing of UHD 50P/60P signals.
To configure the HDMI UHD Color mode for each HDMI connector, turn off the external devices.
You can leave the HDMI cables still connected to the TV. Then, select this function, and then
follow the on-screen instructions.
"
After setting the HDMI connector to On, it takes some time to complete the conversion.
"
If the HDMI connector with HDMI UHD Color enabled is connected to a device that does not support
UHD content, the device may not operate properly. If this is the case, set HDMI UHD Color for the HDMI
connector to Off.
"
Each HDMI connector can be individually optimised for HDMI UHD Color. However, HDMI UHD Color is
available only with a video source featuring the UHD 50P/60P 4:4:4 and 4:2:2 specifications.
"
The HDMI connector with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0, while the
HDMI connector with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2. For
more information, refer to "Read Before Connecting a Computer (Supported Resolutions)".
●
Film Mode
Try Now
Optimises the picture quality for movies.
"
This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI
(1080i).
●
Auto Motion Plus
Try Now
Removes blurring and judder from scenes with rapid movement. If you select Custom, you can
configure Blur Reduction and Judder Reduction manually and set LED Clear Motion to On for a
sharper LED image. To return to the default settings, select Reset.
"
When LED Clear Motion is set to On, the screen appears darker than when it is Off.
"
If LED Clear Motion is On at 60Hz video signal, the screen may flicker.
To Next Page
Loading...
