Using the Screen Burn Protection and Energy Saving
Functions
Preventing screen burn
(MENU/123) MENU System Auto Protection Time
You can use the Screen Burn Protection function to protect the screen. Still images can leave burn-
in after-images if left on the screen for a long period of time. Select a time setting from the list. If a
still image is shown on the screen for longer than the time that you selected, the TV automatically
activates the Screen Burn Protection function.
Reducing the energy consumption of the TV
(MENU/123) MENU System Eco Solution
You can adjust the brightness level of the TV and prevent overheating to reduce overall power
consumption.
●
Energy Saving
Try Now
Allows you to select a brightness setting from the list to reduce the TV's power consumption.
●
Eco Sensor
Try Now
Automatically adjusts the brightness level of the TV, according to the ambient light level, to
reduce power consumption. If the Eco Sensor has adjusted the screen's brightness level, you can
select the Min. Backlight to manually adjust the minimum screen brightness.
"
When the Eco Sensor is set to On, the screen is darker than usual.
●
No Signal Power Off
Try Now
Allows you to select a time from the list. If no signal has been received for a specified duration,
the TV automatically cuts off the power to reduce power consumption.
●
Auto Power Off
Try Now
Automatically turns off the TV to prevent overheating when the TV remains on for four hours
without any user input.
●
Motion Lighting
Adjusts the brightness in response to on-screen movements to reduce power consumption.
"
This function is only available when Picture Mode is set to Standard.
"
This function is not available when the TV is in the 3D mode.
"
This function is deactivated when you adjust a picture quality setting, such as Contrast and Brightness.
To Next Page
Loading...
