Testing noise around the TV's built-in microphone
(MENU/123) MENU System Voice Recognition Voice Recognition Environment Test
This test determines how well Voice Recognition will work in the TV’s current environment. Perform
the Voice Recognition Environment test before using Voice Recognition to make sure it functions
properly.
"
This function is only supported for the 9500 series model.
1.
Run Voice Recognition Environment Test and stand within 3.5m of the TV.
2.
Select Start to measure the echo level. If the echo level is suitable, the test will continue to the
next step. If this part of the test fails, remain quiet and try again.
3.
Select Start to measure the ambient noise. If the ambient noise level is suitable, the test will
continue to the next step. If this part of the test fails, remain quiet and try again.
4.
Measure the volume and clarity of your voice. Say "Hi TV" or "Smart TV," and then say the
command on the TV's screen loudly and clearly within 30 seconds. If the TV successfully
recognises your voice, the test continues to the next step. If this part of the test fails, try again.
Using the voice recognition tutorial
(MENU/123) MENU Support Voice Recognition Tutorial
Try Now
The tutorial lets you familiarise yourself with the basics of using Voice Recognition. Run Voice
Recognition Tutorial from the Support menu, or run Voice Recognition and say "Tutorial".
To Next Page
Loading...
