Connecting a mobile device via Samsung Smart View 2.0
You can play the mobile device's multimedia content, such as videos, photos, and music, when you
install and launch Samsung Smart View 2.0 on a mobile device connected to the TV. You can send
text messages or control the TV using the mobile device.
Connecting a laptop to the TV (Wireless PC Mirroring)
You can view the enhanced or dual modes of a laptop by connecting a laptop to the TV wirelessly.
Connect the Wireless PC Mirroring Dongle (VG-SWD1000) to the laptop's HDMI port, and then connect
a USB cable came with the TV to USB port of Wireless PC Mirroring Dongle (VG-SWD1000)'s and a
laptop. A connection message appears on the TV's screen. If you allow the connection, the laptop's
screen displays on the TV's screen.
"
This function is not available on certain models in specific geographical areas.
"
This function is not available on third-party TV or non-laptop devices.
"
Try to pair again after turning off the TV if the other Samsung TV is located beside the TV.
Changing the input signal with external devices
Press the SOURCE button to switch between external devices connected to the TV.
●
Options
To view the Options menu, press the
button. The functions that appear in the Options menu
can include any of the following:
"
The connector names may vary depending on the product.
–
Edit Device Type: Changes the types of the external devices. Select an external device to
change. For example, you can use an HDMI cable to designate a computer connected to the
TV as PC. You can also use a HDMI-to-DVI cable to designate an AV devices as DVI Devices.
To Next Page
Loading...
