Checking ambient noise and illumination
(MENU/123) MENU Support Self Diagnosis Voice & Motion Control Environment Check or
Motion Control Environment Check
You can test the ambient noise and brightness levels surrounding the TV camera and microphone to
ensure if they are suitable for voice and motion control use.
Activating motion control
(MENU/123) MENU System Motion Control Motion Control
Try Now
Face the TV camera. Lower your hand to a comfortable position. Raise your hand with your index
finger fully extended upwards, and then move your hand slowly to the left or right. When your hand
is successfully recognised by the TV camera, motion control is activated and a pointer and motion
control icons appear on the screen.
"
To deactivate motion control, move your hand out of the range of the TV camera. To reactivate it, simply
move your hand toward the TV camera within 3 seconds.
"
Motion Control may be terminated if your index finger is not fully extended or you move it to fast.
Using the motion control tutorial
(MENU/123) MENU Support Motion Control Tutorial
Try Now
You can learn the basics of using motion control.
To Next Page
Loading...
