Requirements for using motion recognition
●
Be sure to use Motion Control within recommended distances:
–
TV Camera (Built-in): between 1.5m and 3.5m
–
TV Camera (Sold Separately): between 1.5m and 4m
●
The actual recognition range may differ with the camera angle and other factors.
●
You must be located within a range of camera lens, because Motion Control relies on the TV's
built-in camera. Adjust the camera's angle using the wheel on the back of the camera. Do not
point the camera directly at the sun or any other light source or obstruct its view.
●
For the camera to recognise movement, you must stand out from the background.
●
The appropriate ambient brightness is 50 to 500 lux. (100 Lux: Bathroom, 400 Lux: Living Room)
●
Avoid direct sunlight when using Motion Control.
●
Run the Motion Control Environment Test to assess the camera's recognition range before using
Motion Control.
Requirements for using face recognition
●
Be sure to use Face Recognition within recommended distances:
–
TV Camera (Built-in): between 1.5m and 3.5m
–
TV Camera (Sold Separately): between 1.5m and 4m
●
The actual recognition range may differ with the camera angle and other factors.
●
The appropriate ambient brightness is 50 to 500 lux. (100 Lux: Bathroom, 400 Lux: Living Room)
●
Face Recognition can recognise up to 5 different users at a time.
●
The TV may have difficulty recognising twins and people with similar faces as two different
individuals.
To Next Page
Loading...
