If you have a USB (Universal Serial Bus) port enabled on your computer, and if your
computer is running Windows 98, you can connect your ML-1650 series printer to the
USB chain of devices.
Note: Connecting the printer to the USB port of the computer requires a certified
USB cable. You will need to buy the USB 1.0 or 1.1 compliant cable.
➝
To PC
Installing the Printer Software
To operate your printer with Windows PC, you must install the
PCL printer driver. Place the CD-ROM in the CD-ROM drive and
perform the instructions on page 2.11.
1
Make sure that both the printer and computer are turned
ON.
2
Plug one end of the USB cable into the USB port on the
printer.
3
Plug the other end into the USB port on the computer.
4
The Add New Hardware Wizard dialog box appears. Click
Next.
2. Connect printer with
USB cable and
install USB driver
1. Install PCL driver
B.1
USING YOUR PRINTER WITH A USB CABLE
To Next Page
Loading...
