4.10
PRINT MEDIA
Loading Paper
When you change the print settings, if you select Manual Feed in the Paper Source option,
you can manually load paper in the Multi-Purpose Tray. Manually loading paper can be helpful
when you want to check the print quality after each page is printed.
This loading procedure is almost the same as the procedure for loading in the Multi-Purpose
Tray except you load paper sheet-by-sheet in the Multi-Purpose Tray, send print data to print
the first page, and press the Demo button to print each following page.
Using the Manual Feed
1
Load the paper in the Multi-Purpose Tray
with the print side up.
2
Slide the paper width guide to the left
flush against the stack of print media
without bending.
To Next Page
Loading...
