2.3
SETTING UP YOUR PRINTER
1
Open the top cover lid. Pull up on the
handle to open the lid.
2
Carefully tear one end of the plastic bag.
Don’t use a knife or other sharp objects
as they might scratch the drum of the
cartridge.
3
Locate the sealing tape at the end of the
toner cartridge. Carefully pull the tape
completely out of the cartridge. Discard
the tape.
4
Gently shake the cartridge from side to
side to distribute the toner evenly inside
the cartridge.
CAUTION:
To prevent damage, do not expose the toner
cartridge to light for more than a few minutes.
Cover it with a piece of paper if left exposed
for more than a few minutes.
If toner gets on your clothing, wipe it off with
a dry cloth and wash clothing in cold water.
Hot water sets toner into fabric.
Install the Toner Cartridge
Handle
To Next Page
Loading...
