Making Installation Diskettes
If you do not have a CD-ROM drive but you have access to
another computer with a CD-ROM drive, you can copy
software installation files from your printer software CD-
ROM onto floppy diskettes, and then use the diskettes
instead of the CD-ROM to install the software.
You can make installation diskettes for PCL6 printer driver,
USB driver for Windows 98, PostScript Printer Description
(PPD) file and Remote Control Panel utility independently.
Make sure that you have several formatted diskettes ready,
and then follow these steps:
1
Insert the CD-ROM shipped with your printer into the
CD-ROM drive. Installation will start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, and type
x:\cdsetup.exe in the Open box (where x is the drive
letter for the CD-ROM drive), then click OK.
2
When the opening screen appears, select the appropriate
language.
3
Click Make your own Diskette set of software.
G.1
INSTALLING SOFTWARE FROM DISKETTES
To Next Page
Loading...
Need help?
General