Samsung ML-1650

Linux Driver Installation
This Linux driver is designed for the Samsung ML-1650
Series printer and supports Linux Red Hat 6.0 or higher and
Intel Linux. If your Linux version is not included, this driver
might not work properly.
• Install Setup Script file configuration
a. /cdrom/linux/install.sh
b. /cdrom/linux/ssprt.db
c. /cdrom/linux/readme.txt
To install the driver, open the x terminal screen and take the
following steps:
Installation
To mount the CD-ROM drive:
1 Insert the Samsung ML-1650 Series CD-ROM into the
CD-ROM drive.
2 Mount the CD-ROM drive under a directory like /mnt in
order to access the files on the CD-ROM:
>mount -t iso9660 /dev/cdrom /mnt/cdrom
Note: To mount the CD-ROM drive, you must be a super user or
must be authorized to mount the CD-ROM by the super user. If
you fail to mount the CD-ROM drive, ask the system
administrator.
1. Mount the CD-ROM
drive.
2. Install setup script.
For details on installing the setup script, refer to the
/cdrom/linux/readme.txt file.
Add the driver to the printer list by typing in:
/cdrom/linux>install.sh (or)
/cdrom/linux>./install.sh (if the path of the current
working directory is not determined.)
I.1
USING YOUR PRINTER IN LINUX