The printer is receiving or processing data. Wait for the
job to print.
Pressing the Cancel/Reprint button cancels the
current job. One or two pages may print as the printer
clears the print job. The printer will return to the ready
mode after the job has been canceled.
Processing
The Data light blinks rapidly. Data is in the printer
memory waiting to be printed.
Pressing the Cancel/Reprint button cancels the
current job and the printer returns to the ready mode.
Data
Control Panel Light Message
The Data light is on and the printer is ready to print.
No action is needed. If you press and hold the Demo
button for about 2 seconds, a demo page will print. If
you press and hold the button for about 6 seconds, a
configuration sheet will print.
Ready Mode
Control Panel Lights
The control panel lights indicate the status of your printer. If the Error light is
on, the printer is experiencing an error. See “Troubleshooting Error Messages”
on page 7.22.
symbol for “light on”
symbol for “light blinking”
symbol for “light off”
Light status legend
3.4
USING THE CONTROL PANEL
To Next Page
Loading...
