45
Using the flash popup button
The flash operates when the built-in flash is opened by using the
flash button. When the flash is closed, it will not burst out the light
and the
, , and modes support automatic popup
and flash light.
1
In Shooting mode, press [ ].
2
Align your subject in the frame and half-press
[Shutter] to focus.
3
Press [Shutter] to take a photo.
UÊ ÛiÊÊÌiÊV>ÃiÊÌ>ÌÊÌiÊLÕÌÊy>ÃÊÃÊ>Ài>`ÞÊ
popped out by using the 'Flash' button, the bursting
function is not supported when the flash option of
menu is set to Off.
Setting the flash option
If a picture is taken in a dark place, the picture may appear to be dark
since the light source is not sufficient. Press [
] to pop up the flash.
1
In Shooting mode, press [MENU].
2
Select Shooting 2 (
2
) → Flash → an option.
Off
The flash light doesn't operate.
SMART
Smart Flash
The amount of flash light is adjusted automatically
according to the exposure in the surrounding
environment.
Auto
The flash light operates automatically in the dark
place.
Auto+Red
The flash light operates automatically and prevents the
red-eye effect.
Fill in
UÊÊÜ>ÞÃÊ«iÀ>ÌiÃÊÌiÊy>ÃÊ}Ì°
UÊÊ
The brightness of flash light is automatically controlled.
Fill-in Red
Always operates the flash light, and prevents the
red-eye effect.
1st Curtain
Operates the flash light immediately after the opening
of shutter
2nd Curtain
Operates the flash light just before the closing of
shutter
Taking a picture in a dark place
The function can be set directly by pressing [Fn] in the shooting mode.
UÊ /iÊ«VÌÕÀiÊV>ÊLiÊÌ>iÊLiÌÌiÀÊvÊÌiÊÃÕLiVÌÊÃÊV>Ìi`Ê
within the applicable range of flash.
(Refer to the Guide No in “Specification.”)
UÊ 9ÕÊV>ÊÃiÌÊÌiÊ>ÕÌÊy>ÃÊ«ÌÊÞÊÜÌÊÌiÊiÝÌiÀ>Ê
flash for exclusive use by the NX-series model.
UÊ /iÊ>Û>>LiÊy>ÃÊ«ÌÃÊ>ÀiÊ`vviÀiÌÊ`i«i`}ÊÊÌiÊ
shooting modes.
Flash button
To Next Page
Loading...
Need help?
General
Weight and Dimensions
