8-6
Copyright
ⓒ
since 1995 Samsung Electronics. All rights reserved.
2) Error message may appear when it fails to load a script le.
Click the “OK” button.
3) It will attempt to download the “CIS DOT” le via FTP server.
Press the “OK” button to continue.
4) When the “FPS” button is disabled, its button color is not blue. It indicates there is an error for
in setting up the COM port.
Follow these steps to reset up the COM port. Select the “Option” tab and click the “SETTING” and then
click the “COMPORT”.
Set the new value for COM as illustrated below.
The “FPS” button becomes enabled, turning its button color is blue.
5) Select the “Option” tab and click the “SCRIPT FILE OPEN”. Then click the “Open” to select the “shutter.txt”.
(Location: NX200 SHUTTER 2.5 \ Script \ shutter.txt)
Fig. 8-8
Fig. 8-9
Fig. 8-10
Fig. 8-11
OK
OK OK OK
OK Cancel
Downloading the CIS DOT Unable to connect with FTP
CIS DOT le download is nished
NXShutterTester 2.5(Aug 25 2011,08:40:03) NXPTP_DLL 1.3(Aug 24 2011,10:45:04)
Option HELP
test
READY
TOTAL 15
PASS 8
FAIL 7
START STOP
PTP RFS
ScannerAutoStart
NO SENSOR ASENSOR A SENSOR B SENSOR C
ITEM DATA
Cancel
Libraries
Computer
Network
File name
Files of type
Desktop
Recent Places
Look in
Date
PM
text le
Open
Name Type
Open(O)
Script
shutter.txt
Script le(*txt,*adi)
shutter.txt
To Next Page
Loading...
