Samsung SCD6040 - Taking Motion Clips (MPEG) Using the Camera

ENGLISH
106106
The Camera : Basic Picture Taking
Taking Motion Clips (MPEG) Using the Camera
✤
You can record movies using the (MOVIE) mode.
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Set the Mode Dial to (MOVIE).
The indicator appears on the LCD monitor.
3. Press the MENU button.
✤
MPEG Resolution
The supported MPEG resolution is 320x240.
✤
Setting up the MPEG Frame Rate
1. Press the LEFT or RIGHT button to select (FRAME RATE), then press the DOWN button.
The available options are listed: 30fps, 15fps
2. Select an option by pressing the DOWN or UP button, then press the OK button.
The selected option is applied.
FRAME RATE
Preparation – Setting the Resolution and Frame Rate