ENGLISH
7676
The Camcorder : Playback
Searching Still Images
✤
Searching the Still Images recorded on a tape works only in PLAY mode.
✤
Recorded Still Images are played back using stop-motion.
1. Turn your camcorder on by setting the Power Switch to PLAY mode.
2. Press the MENU button.
The top menu including A/V is displayed.
3. Press the DOWN button to select A/V , then press the OK button.
The submenu including PHOTO SEARCH is displayed.
4. Press the DOWN button to select PHOTO SEARCH , then press the OK button.
The / indicator flashes on the LCD monitor.
5. Press the (REW) or (FF) button to begin the search in given direction.
The / indicator and NOW SEARCH message appear on the LCD monitor and the
search begins.
The PHOTO SEARCH will stop after one still image has been found. To begin another search,
press the or button.
6. To stop the search, press the MENU button or the (STOP) button.
✤
When there are no still images recorded on the tape, it will be fully rewound or forwarded.
Note
To Next Page
Loading...
