Samsung SCD6040 - Quick Start

To Next Page

To Previous Page

✤ This device is a Camcorder and a Digital Still Camera in one system and provides a variety of functions. Please read this

manual in its entirety.

✤ Before using the device, install the accessories in the following order:

1. Install the battery pack. Insert a cassette

(refer to page 47).

2. Insert the Memory Card into the memory card slot

(refer to page 83).

3. Charge the battery pack by connecting the power cable

to the camcorder.

4. Set your device to REC or (CAMERA) mode by

setting the Power Switch (refer to page 31).

5. Press the START/STOP button to record a video, or

press the PHOTO button to record a still picture.

6. When finished, set the Power Switch to OFF.

✤ To connect DC Power In / Multi-AV / DV / USB cable to the camcorder, open the LCD monitor and then open the Jack

Cover.

ENGLISH

Start

Quick Start

Note

START/STOP

PHOTO

Related product manuals