Samsung SCP-3120 - Dip Switch Settings (Sw2; Communication Protocol

20_ installing your camera
installing your camera
COMMUNICATION PROTOCOL DIP SWITCH
SETTINGS (SW2)
Coaxial communication automatically detects signals, and so does not require a
separate communication setup process.
Protocol Settings
Select a communication protocol for the camera
No Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4
1 AUTO DETECT OFF OFF OFF OFF
2 Samsung-T OFF OFF OFF ON
3 Pelco-D OFF OFF ON OFF
4 Pelco-P OFF OFF ON ON
5 Samsung-E OFF ON OFF OFF
6 Panasonic OFF ON OFF ON
7 Vicon OFF ON ON OFF
8 Honeywell OFF ON ON ON
9 AD ON OFF OFF OFF
10 GE ON OFF OFF ON
11 BOSCH ON OFF ON OFF
12 Reserved ON OFF ON ON
13 Reserved ON ON OFF OFF
14 Reserved ON ON OFF ON
15 Reserved ON ON ON OFF
16 Reserved ON ON ON ON
Baud Rate Settings
Select the transfer speed of a selected communication protocol.
No. Baud Rate(BPS) SW2-#5 SW2-#6
1
2,400 ON ON
2
4,800 ON OFF
3
9,600 OFF OFF
4
19,200 OFF ON
*
❖
❖
ON
ON
OFF
SW2
SW2 Pin No. Purpose
1~4 Protocol Settings
5~6 Baud Rate Settings
7 Response Mode Settings
8 Termination Settings
C
T
❖
❖