40_
installing your camera
installing your camera
SCP-3120VH
Use the provided L-shaped wrench to loosen 4 screws counter clockwise, which will
help removing the housing.
Fix the housing to the NP 1.5" tapped pipe, wall mount (SBP-300WM) or ceiling mount
(SBP-300CM) by turning it clockwise. For waterproofness and lock between the two
component parts, use the Tefl on tape to wrap them around.
1.
2.
PIPE or MOUNT
PIPE or MOUNT
HOUSING
HOUSING
NP 1.5' TAP
HOUSING
MAIN-FRAME
SCREW
SCREW
3
4
To Next Page
Loading...
