English English _ 67
FUNCTIONAL DESCRIPTION
Auto Run
Main Menu/Sequence Setting/Auto Run
If there is no controller operation by the user for a
certain time, the sequence operation designated by
the user will be executed.
Mode :
HOME
: Auto run Home Position (Refet to the
Preset Menu.)
PRESET : Auto run a selected preset number.
SWING : Auto run a selected Swing mode.
GROUP : Auto run a selected Group mode.
TOUR : Auto run a selected Tour mode.
TRACE : Auto run a selected trace mode.
A.PAN : Auto run a 360-degree pan. To activate
the panning command, you need to set
up the camera's tilt angle and auto pan
speed manually.
SCHEDULE : Schedule a sequencing action by
day and time. Refer to the next
page.
Time :
Enables setting up an Auto Run duration. (The
duration can be 5~30 seconds, or 1~5 minutes.)
►
•
-
-
-
-
-
-
-
-
•
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Auto Run
Mode OFF
Time 20 SEC
To Next Page
Loading...
Need help?
General
