Samsung SCP-3120 - Camera Operation and Functions; Interface Symbols and OSD Menu Navigation

42_ interface symbols
Motion Detection Standby/Operation Display :
When in standby mode, the " " in the upper right of the screen blinks and then
changes to " " if motion is detected.
Alarm Input Port Status Display :
"①","②" in the upper right of the screen blink.
Current Alarm Port Display According to Input Alarm Ports(Priority) :
Only one of " ➊"," ➋" in the upper right of the screen blinks.
Preset Number Display Settings :
'*' : If a preset number is already available
'H' : If a preset location is the camera’s home position
If an OSD Menu has Sub Menus :
" " displays at the end of the menu.
If an OSD Menu Does Not Have Sub Menus :
No symbol appears at the end of the menu.
PTZ Function Screen :
Preset Number Setting Screen :
•
-
•
-
•
-
•
-
-
•
-
•
-
•
•
Preset Edit
Preset=011* (1~255)
ID=001 ➊①②
Area1 Area Name
G-SEQ1
PRESET=001 Preset Name
P:300 T:040 10X
Preset Info
Sequence Status
Motion Detect
Alarm Input
Area Display
interface symbols
O
O
C
T
c
c
•
•
•
•
❋