28_
installing your camera
installing your camera
PREPARING ADAPTER AND CABLES (SOLD SEPARATELY)
Power Adapter
Power adapter has the capacity AC24V 1.0A(SCP-3120)/2.5A(SCP-3120V/VH).
-
Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
-
Distance Recommended Cable Specifi cation
300m 4C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
If the camera is controlled through coaxial communication, please use a video amp
intended for coaxial communications. Regular video amps do not transfer coaxial
signals.
Communications Cable
For the camera to communicate with the controller,
a RS-485 communications line is required. To
ensure the quality of long distance communication
and the accuracy of the overall communication it is
recommended using a twisted pair cable such as
UTP.
Depending on the camera’s environment, the communications distance may vary.
Power Adapter, Video cable and communications cable are not provided in this
product’s package.
M
-
J
M
P
F
e
·
To Next Page
Loading...
