72_ functional description
functional description
Area Setting
Main Menu/P/T Setting/Area Setting
The Area Setting menu enables selecting certain
locations in the course of the Pan and Tilt operation,
and then display the areas with the OSD (On Screen
Display) texts when the camera passes through
them. Up to 8 areas can be selected.
Area Name :
You can add names to selected areas. Names
can be up to 12 characters and can be entered via
the joystick and the Enter key. Once a name is
entered, use the joystick and the Enter key to
perform the Set command and save the name.
Position :
As shown in the picture below, move the joystick
to select the upper left corner and lower right
corner of an area.
ON/OFF :
Cancels or activates the display function of
selected areas.
►
•
•
•
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
Jog Speed MANUAL
Max Speed Level 5
Area Setting
Area 1
Area 2
Area 3
....
Area 1
Area Name
Position
Activation OFF
Area Name[ ]
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
1234567890 ()
[ ]-/#*!?,.
BACK SPACE CLR SET
Area setting
Enter: Set ESC: Exit
Area setting
Enter: Set ESC: Exit
To Next Page
Loading...
