Samsung SCP-3120 - Sequence and PTZ Control Features

58_ functional description
functional description
SEQUENCE SETTING
Preset
Preset Location Saving
Main Menu/Sequence Setting/Preset/Setting
This function enables the memorization of a selected
location and activates the Pan, Tilt, and Zoom
functions at that location. Saved locations can be
recalled using the Preset Execute command.
Setting Up Preset Numbers :
Selecting the Preset Setting menu brings up a
screen as shown below. Move the joystick in
all four directions to select the desired
number. (Only SCC-3100A, SCC-1000)
Saving Preset Locations :
Selecting a preset number and pressing the
Enter key redirects the menu to the screen
shown below.
Using the joystick, adjust the location of the
Pan and Tilt functions and then set the Zoom
and Focus command.
In Preset Settings, the Zoom and Focus
command is controllable only by the Zoom
command. To switch between Zoom and
Focus, use the Preset 1 and 2 commands as
shown below.
►
•
•
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Preset
Setting
Edit
Home Position OFF
Execute
Clear
Status
Preset Setting
Preset = 001 (255)
Preset Setting
1+PST:ZOOM 2+PST:FOCUS