English English _ 37
INSTALLING YOUR CAMERA
,
SCP-3120V (CEILING MOUNT)
Use the provided L-shaped wrench to remove the surface mount by loosening 4
screws counter clockwise.
Drill holes (5 mm in diameter and at least 35 mm in depth for each) for the screws (x4)
to be inserted in the bottom of the surface mount, and insert the provided plastic
anchor (HUD5) to the end.
Insert the cables into the cable hole, and fi x the SCREW-TAPPING (TH M4xL30) to the
plastic anchor that was inserted in the hole for fi xing the surface mount. (x4)
1.
2.
surface
body
screw
SURFACE MOUNT
To Next Page
Loading...
