Samsung SCP-3120 - Page 45

English English _ 45
OPERATING YOUR CAMERA
H
P1 P2 P3 P4 P5
Sequence
Setting
Preset Setting/Edit/Home Position/Execute/Clear/Status
Swing SEQ.
Pan Swing Setting/Execute/Clear
Tilt Swing Setting/Execute/Clear
P&T Swing Setting/Execute/Clear
Group SEQ. Group1~6 Setting/Execute/Clear
Tour SEQ. Setting/Execute/Clear
PTZ Trace Trace1~4 Replay/Replay Once/Memorize/Clear
Auto Run
Mode
OFF
SCHEDULE Sunday~Saturday
A.PAN
AutoPan Speed/Tilt
Angle
TRACE Trace(1~4)
TOUR
GROUP Group No(1~6)
SWING
Swing Mode
(PAN,TILT,P/T)
PRESET Preset No(1~128)
HOME
Time 5~30(SEC), 1~5(MIN)
Power On Resume ON/OFF
Sequence
Setting
(Preset Edit)
Motion Det.
Motion OFF/DETECTION/TRACKING
Advanced OFF/ FIXED/MOVED
Display OFF/ON
Sensitivity 1~7
Resolution 1~5
The rest of the installation steps are the same as in the camera setting section.
P/T Setting
Pan Limit
Position
Activation ON/OFF
Tilt Limit
Position
Activation ON/OFF
Area Setting Area1~8
Area Name
Position
Activation ON/OFF
Area Masking
Mask Set MASK1~12
Activation(OFF/ON),
Edit
Position
Style MOSAIC1~4/GRAY
Prop.P/T ON/OFF
Digital Flip ON/OFF