56_ functional description
functional description
Day/Night
Main Menu/Camera Setting/Day/Night
The Day & Night function allows the camera to switch
between the Color and B/W modes.
Modes :
Auto : Operates in Color mode most times, and
switches to B/W mode if a low light level is
detected during nighttime.
Color : Operates in Color mode at all times.
BW : Operates in B/W mode at all times. By
using the Burst On/Off sub menu, burst
signals can be retained or disabled.
If the camera is in B/W mode and connected to
equipment that requires external sync through
burst signals, set the Burst On/Off option to “On.”
Dwell Time :
The duration of both the lighting conditions can be
customized to let the camera delay the switching
between the daytime and night-time settings.
Using B/W mode under sunlight or a halogen lamp may decrease the focusing
performance.
►
•
-
-
-
❋
•
M
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Camera Setting
Zoom/Focus
White Balance ATW(IN)
Exposure
Back Light OFF
AGC ---
DNR MEDIUM
XDR OFF
Day/Night
Others
Day/Night
Mode AUTO
Dwell Time 3 SEC
To Next Page
Loading...
