2.2.3.1 Feeding Part
It is consists of a basic cassette, an MP tray for printing on special media (envelope, label, special paper).
1) Separation method
Paper is separated by the friction pad mounted to the center of the cassette.
2) Input tray
This model uses a bin-type tray to hold the paper.
It takes a center loading method and applies ‘friction pad
separating method.
Both the side guide and the rear guide can be adjusted for
various types of papers from A6 to legal size paper.
The input tray uses a Paper Empty Sensor for paper
detection.
(Capacity: 150 sheets (80g/㎡ paper standard), paper
arranging function, various size papers accepting function.
In the front side, there is a paper level indicator.
3) Pick- up roller
The paper feed system is comprised of a paper pickup,
driving, control function, paper feeding, and static removal
function. The Pick up roller is driven by a solenoid.
To Next Page
Loading...
