Samsung SCX 3205 - Scan motor

Disassembly and Reassembly
Service Manual
3-7
Samsung Electronics
3.4.3 Scan motor
1. Remove the scan unit. (Refer to 3.4)
2. Turn the scan unit over. Remove the CAP-
SENSOR after removing 1 screw.
3. Remove the OPE unit and scan glass.
(Refer to 3.4.1~3.4.2)
4. Release the belt.
5. Release the shaft.
6. Release the CAP-SCAN Motor after removing 1
screw.
CAP-SENSOR
Belt
Shaft
CAP-SCAN
CAP-SENSOR
Belt
Shaft
CAP-SCAN
CAP-SENSOR
Belt
Shaft
CAP-SCAN