Samsung SDC-415 Series - White Balance Control

COLOR CCD CAMERA User’s Manual
17
COLOR CCD CAMERA User’s Manual
16
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to point to
'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
➲ DC/VIDEO : Auto iris lens selection
• Whenusinganautoirislens,thesettingoftheautoirislensselectionswitch,locatedon
thebackofthecamera,mustbeonDCorVIDEOdependingonthetypeofthelenswhich
isbeingused.(Pleaserefertothepictureonpage11)
• The brightness of the screen can be adjusted in DC mode. The brightness can be adjusted within
therangeof1~70.Theoptimumlevelofbrightnessfortheusercanbeachievedbyadjustment.
Notes
➲ MANUAL : Manual lens selection
3. Please press the SETUP button if you wish to return to the previous menu.
LENS (selection)
SHUTTER (condition and speed control)
WHITE BALANCE control
Autoormanualcontrolcanbeselected.
1. When the SETUP menu is on the screen, please position the arrow to
point to 'SHUTTER' by using the DOWN button.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
➲ FLK :Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency.
NTSC Model: 1/100, PAL MODEL: 1/120
➲ ESC :   Auto control of the shutter speed can be achieved. When ESC mode is on, the
speed is controlled automatically according to the brightness of the screen.
ThescreencolorcanbeadjustedbyusingtheWHITEBALANCEfunction.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by using the UP and
DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
➲ MANUAL: The shutter speed can be controlled manually.
3. Please select 'MANUAL' mode if you wish to adjust the shutter manually.
• You can select speed from ‘1/60’ to ‘1/120,000’sec (NTSC Models), ‘1/50’ to
‘1/120,000’sec (PAL Models).
4. Please press the SETUP button when all the settings are complete.
• WhenselectingDC/VIDEOlens,theshutterspeedisfixedat1/60(1/50).
• Whileusingtheinternalsynchronoussystem,iftheshuttersettingison
 'ESC'andthecameraisdirectlyfacingabrightfluorescentlight,theimageonthescreen
can be adversely affected. Therefore please choose the installation location with care.
• When'MANUAL'modeison,theSENSUPfunctiondoesnotoperate.
Notes
Camera Operation