Why does my Samsung Security Camera video pause suddenly?
If you experience sudden video pauses with your Samsung Security Camera, check if the network camera is properly connected using a network cable. If you're using a hub or IP router, ensure that device is working correctly. You can also open a command prompt to verify if the network camera is connected to the network.
What to do if my Samsung SNP-3370 monitor displays a white image?
If the monitor displays nothing but a white image from your Samsung Security Camera, check the WDR settings.
How to stop my Samsung SNP-3370 from switching between color and B&W modes too frequently?
If your Samsung Security Camera switches between color and B&W modes too frequently, adjust the Duration and Dwell Time in the Day & Night menu.
General| Model | SNP-3370 |
|---|---|
| Communication | RS-485 |
| Type | Network PTZ Camera |
| Image Sensor | 1/4" CCD |
| Horizontal Resolution | 480 TV Lines |
| Video Compression | MPEG-4, MJPEG |
| Network Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, NTP, RTP/RTCP, RTSP, SMTP, FTP, PPPoE, UPnP |
| Operating Temperature | -10°C ~ +50°C (+14°F ~ +122°F) |
| Power Supply | 24V AC |
| Mount Type | Ceiling, Wall |
Details the advanced capabilities and technical specifications of the camera.
Lists all items included in the camera's package for installation.
Identifies and describes the physical components and ports on the camera.
Explains the connections and functionality of the camera's wiring interface board.
Illustrates connection methods for PTZ dome cameras and accessories.
Details the configuration of DIP switches for protocol, baud rate, and ID settings.
Guides on selecting and preparing power adapters and communication cables.
Instructions on connecting the camera's video output to a monitor for viewing.
Covers the process of preparing and installing the camera mounting bracket.
Provides a step-by-step example for mounting the camera on a ceiling.
Outlines steps for configuring the camera's network settings and establishing connection.
Explains how to log in and navigate the basic Web Viewer interface.
Describes the main monitoring screen elements and display options.
Guides through various settings available in the Administrator page.
Covers video compression, resolution, frame rate, and audio settings.
Details continuous JPEG transmission and RTP/RTSP streaming services.
Explains how to configure motion detection sensitivity and enable it.
Describes settings for video analytics, including sensitivity and timing.
Guides on specifying and masking areas for privacy protection.
Covers focus, zoom, white balance, exposure, and backlight settings.
Details how to save image data to an SD memory card.
Explains how to watch recorded events and back up data.
Covers PTZ control functions like presets, groups, tours, and auto-run.
Configures camera movement patterns for swing monitoring.
Details how to create and manage groups of preset locations.
Configures sequential playback of preset groups for tours.
Explains saving custom movement paths and automatic camera actions.
Accesses configuration settings like network, IP filtering, and alarm sensors.
Covers LAN, xDSL, and DHCP options for network connectivity.
Allows enabling IP filtering to permit or deny specific IP addresses.
Details settings for digital sensors and digital outputs (relays).
Configures email and FTP settings for alarm notifications.
Provides access to system information, user management, and upgrades.
Displays camera model, MAC address, and installation details.
Allows changing administrator passwords and managing user accounts.
Configures the camera's time, timezone, and NTP server synchronization.
Provides access to system and event logs for monitoring.
Guides on updating the camera's firmware and managing settings.
To Next Page