Why can't I access my Samsung SNV-L6013R Security Camera from a web browser?
If you're unable to access your Samsung Security Camera through a web browser, verify the camera's network settings are correct. Ensure all network cables are properly connected. If using DHCP, confirm the camera obtains dynamic IP addresses without issues. Also, if connected to a Broadband Router, check that port forwarding is correctly configured.
What to do if my Samsung SNV-L6013R connected to the network is not detected in the IP installer program?
If your Samsung Security Camera isn't detected in the IP installer program, turn off the firewall settings on your PC and then search for the camera again.
What to do if my Samsung Security Camera viewer got disconnected during monitoring?
If your Samsung Security Camera viewer disconnects during monitoring, first check all network connections. Disconnections can occur when changes are made to camera or network configurations. If the camera is connected over a PPPoE network, poor network conditions may also cause disconnections.
What to do if I cannot connect to my Samsung SNV-L6013R Security Camera system using a tab browser of Internet Explorer 7.0?
If you're unable to connect to your Samsung Security Camera system using a tab in Internet Explorer 7.0, avoid using a new window or tab. Instead, select 'File ? New session' because an error might be generated when connecting with a new window or tab since the cookie data are shared.
Why does my Samsung SNV-L6013R have overlapping images?
If you're experiencing overlapping images with your Samsung Security Camera, it may be because two or more cameras are set to a single multicast address instead of different addresses. If a single address is used for multiple cameras, the images may overlap.
Why is my Samsung Security Camera unable to send files via email after motion detection?
If your Samsung Security Camera can't send files via email after motion detection, verify these settings in sequence: 1. Check the settings. 2. Ensure is set to . 3. Confirm the option of menu is checked to use.
What to do if Micro SD memory card is inserted but the Samsung SNV-L6013R Security Camera does not operate properly?
If your Samsung Security Camera isn't operating correctly after inserting a Micro SD card, ensure the card is inserted in the proper direction. Also, if the memory card was formatted by other devices, format the memory card again in ? ? menu, because operation of memory card that is formatted by other devices is not guaranteed with this camera unit.
What to do if my Samsung SNV-L6013R reports that NAS setting has failed?
If your Samsung Security Camera reports a NAS setting failure, confirm the following: * The IP address of the NAS is valid. * The ID/password of the NAS is valid. * You can access the folder designated as the default folder using the ID of the NAS. * The NAS SMB/CIFS items are unchecked. * The NAS IP address and the camera IP address are in the same format. * Check whether you tried to access as another user without formatting the default folder saved or used. * You used recommended NAS equipment.
General| Model | SNV-L6013R |
|---|---|
| Category | Security Camera |
| Type | Dome Camera |
| Maximum Resolution | 1920 x 1080 |
| Lens Type | Fixed |
| Focal Length | 2.8mm |
| Field of View (Vertical) | 54° |
| Infrared Distance | 20m |
| Night Vision | Yes |
| Day/Night | Yes |
| Weather Resistance | IP66 |
| Connectivity Technology | Wired |
| Form Factor | Dome |
| Sensor size | 1/2.9" |
| IR Range | 20m |
| Power Supply | DC 12V |
| Operating Humidity | 0% ~ 90% |
To Next Page