Samsung SPU-3750T - White Balance Adjustment; Exposure Control Settings

SPEED DOME CAMERA User’s Manual
48
SPEED DOME CAMERA User’s Manual
49
Functional Description Functional Description
The White Balance menu adjusts the balance of the screen
colors under different lighting conditions.
Camera Setting
①Focus & Zoom
White Balance ATW
③Exposure
④Back Light OFF
AGC Medium
SSNR Medium
⑦Day & Night
⑧Others
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
- ATW : Adjusts the screen color automatically.
- Indoor : Adjusts the screen color to be optimal in an
indoor environment. (Operating Temperature:
about 1,800°K ~ about 10,500°K)
- Outdoor : Adjusts the screen color to be optimal in an
outdoor environment. (Operating Temperature:
about 3,600°K ~ about 10,500°K)
- AWC : Adjusts the screen color to be optimized to the
current lighting and monitor conditions. Using this
setting may require an readjustment if the lighting
conditions changes.
- MANUAL : Enables customization the Red and Blue gains.
2. White Balance
 ▶
Main Menu/Camera Setting/White Balance
White Balance may not work properly under the following conditions.
 When the color temperature of the environment surrounding the subject is out of the
control range.(e.g. Clear sky or sunset)
 When the ambient illumination of the subject is dim.
 If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, White Balance adjustments may not deliver
consistent results.
Notes
Camera Setting
①Focus & Zoom
White Balance ATW
③Exposure
④Back Light OFF
AGC Medium
SSNR Medium
⑦Day & Night
⑧Others
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
➡
Exposure
Brightness 050
Iris AUTO
Shutter ---
Sens-Up AUTO
3. Exposure
 ▶
Main Menu/Camera Setting/Exposure
The Exposure settings are to control the camera’s exposure
meter.
Brightness : Adjusts the screen brightness.
(Over 50: Brighter, Under 50: Darker)
Iris :
- Auto : Automatically adjusts the exposure meter.
- Manual : Enables manual adjustment of the exposure
meter. (Over 50: Brighter, Under 50: Darker)
Shutter : Controls the camera’s electronic shutter.
- --- : The shutter speed is fixed at 1/60 for NTSC and 1/50
for PAL. Operates when Iris is on the Auto Mode.
- ESC : Adjusts the shutter speed automatically according
to the screen brightness. Operates when Iris is on
the Manual Mode.
- A.FLK : Select this setting when you experience picture
flickering. Flickering can happen when artificial
lighting frequencies clash with camera frame rates.
- Manual : Enables manual adjustment of the shutter speed.
Sens-Up :
- Auto : Automatically detects light levels and maintains a
clear picture at night or under low-light conditions.
- Sens-Up Limit : Adjusts to the maximum-powered zoom
per frame.
•Foroptimal performanceof theA.FLKmode,avoid
using the mode in conjunction with Backlight.
•WhiletheInternalSyncmode isineffect, settingthe
shutter to '---' and facing the camera directly to a
bright light source may cause poor camera
performance.
•Sens-UpisdisabledwhentheshutterisinManualor
A. FLK mode.
Notes