• Two different Auto Track setup methods are available.
Using Presets
- Select a starting point for Auto Track as a preset to activate Auto Tracking.
(This can be used in conjunction with Group SEQ and Tour SEQ.)
Using Target Lock
- Select an object on the screen to activate Auto Tracking.
At Preset Edit, select the preset number under
the Preset Settings menu.
At Menu 7 [After Act.], select [TRACK].
- TRACK : Perform Auto Track upon arrival.
When the [After Act.] menu is set to [TRACK], the
letter “T” appears next to the preset number as
shown in the figure.
Select the preset as the starting point for Auto
Track. Using the joystick, set the Pan/Tilt and
Zoom/Focus options.
✽ The selected preset is indicated with an asterisk (*).
Auto Track Using Presets
1. Selecting Auto Track Starting Point 1
▶
Main Menu/Sequence Settings/Preset/Settings
2. Selecting Auto Track Starting Point 2
▶
Main Menu/Sequence Settings/Preset/Edit
Preset
Settings
Editing
Presets
Auto
Tracking
· Set a Preset to Start
Auto Tracking
· Set Zoom/Focus
· Tracking On
· Set Auto Tracking
details
· Select Tracking Mode
for a Preset
<Auto Track Setting Flow Chart>
Preset Setting
Preset = 001 (255)
Preset Edit
Preset = 001* (1~255)
Preset Setting Z>Z00M
1+PST:ZOOM 2+PST:FOCUS
Use W/T Preset
Preset Edit
Preset = 001T (1~255)
Preset Edit [001]
PTZ 271/045/1X
Focus Mode ONE SHOT AF
Brightness 050
Iris AUTO
Back Light
Day & Night B/W
After Act. OFF
⑧Scene Adj.
Setting Up Auto Track
Auto Track 1
Auto Track OFF
Camera Height 02.5M
Object Size SMALL
Sensitivity HIGH
Zoom Control OFF
Auto Release OFF
Auto Return OFF
Lost Mode STOP
At Menu 1 [Auto Track], select [ON] to activate
Auto Tracking.
Set the Camera Height, Object Size, Sensitivity,
and Zoom Control options.
Refer to the timing chart below to set the [Auto
Release], [Auto Return], and [Lost Mode] options.
3. Setting Auto Tracking Details
▶
Main Menu/P/T Settings/Auto Track1
Using the joystick, select a preset number from 1
to 255, and then press [Enter].
To Next Page
Loading...
