Samsung SPU-3750T - Fan Life and Status Information

SPEED DOME CAMERA User’s Manual
84
SPEED DOME CAMERA User’s Manual
85
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
26.1 Setting Fan Life
 ▶
Main Menu/Initialize/Fan Life
Message Display
:
The following alert message appears 2 months before the
fan lifespan expires: Fan Life was Expired. Replace the Fans.
"Fan life Expired., Replace the Fans"
-ON : Displays alert messages. (Default Option)
-Off : Hides alert messages.
✽ The [Off] option does not automatically delete the messages
but keeps them hidden from the screen. To show the
messages again, change it back to [On]. (Displays only
messages that are not deleted by [Message Clear].)
Message Clear
:
Deletes alert messages from the screen.
✽ [Cleared] messages do not display on the screen when the
display option changes back to [On].
Time Reset
:
Resets and starts counting the lifespan of a fan when it is
replaced.
(The Reset function activates only after the fan lifespan
alert message is active.)
✽ This function counts the lifespan of a fan only during its
operation; it may be used longer than the expiration date
displayed on the OSD.
Time Remain.(hour)
:
- 49000 : Indicates the remaining lifespan of the current
fan. (Unit: hours)
- The remaining time refreshes when the [Fan Life] menu is
selected and the [Enter] key is pressed in the [Time Remain
(hour)] option.
Functional Description
Initialize
①Power On Reset
②Factory Default
③Camera Default
Auto Refresh OFF
⑤Auto Track Default
⑥ Fan Life
Fan Life
Message Display ON
②Message Clear
③Time Reset
Time Remain.(hour) 49000
➡
➡
Functional Description
Camera Status
CAM MODEL = 37NHU
CAM VERSION = 3.8
DOME VERSION = 1.16
CON PROTOCOL = SAMSUNG TW
DOME ID = 001
CONTROLLER = Simplex-9600
TRACK VERSION = 1.08
COAX VERSION = 1.04
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
27. Status
 ▶
Main Menu/Status
Displays the settings and version of the dome camera.
Cam Model
:
Indicates the model name of the camera.
Cam Version
:
Indicates the software version of the camera.
Dome Version
:
Indicates the version of the camera control board.
CON Protocol
:
Indicates the status of the current protocol.
Dome ID
:
Dome Camera ID
Controller
:
Indicates the settings of the current communications mode.
Track Version
:
Indicates the Auto Track software version of the camera.
COAX VERSION :
Indicates the software version of the Coax communication
Status