How to install an HDD in SRN-873S
1. First of all, loosen the screws in the left, right, and
back of the case, and remove the cover.
2. Loosen a screw from the HDD bracket and remove
the bracket.
` While applying pressure to both side end grips of the bracket,
pull them forward to remove the HDD bracket from the main
body.
3. After aligning and inserting one side of the HDD to
the bracket, open the other side bracket wide and
insert the HDD between them.
` Align a hole in the bracket with a screw hole in the HDD to fix
them.
G
1
23
1
2
3
4
NCNO
NO
NO
COM COM COM
ALARM
OUT
ALARM
IN
eSATA
VIEWER
PoE
CAMERA
1
2
3
4
5
6
7
8
CONSOLE
To Next Page
Loading...
