Caution :
It is harmful to the air conditioner if it is used in the following environments: greasy areas
(including areas near machines), salty areas such as coast areas, areas where sulfuric gas
is present such as hot spring areas. Contact your dealer for advice.
Selecting Area for Installation
Select an area for installation that is suitable to customer’s needs.
1
1. Make sure that you install the indoor unit in an area providing good ventilation.
It must not be blocked by an obstacle affecting the airflow near the air inlet and
the air outlet.
2. Make sure that you install the indoor unit in an area allowing good air handling
and endurance of vibration of the indoor unit.
3. Make sure that you install the indoor unit in an area where there is no source
of heat or vapor nearby.
4. Make sure that you install the indoor unit in an area from which hot or cool air is
spread evenly in a room.
5. Make sure that you install the indoor unit in an area away from TVs, audio units,
cordless phones, fluorescent lighting fixtures and other electrical appliances
(at least 1 meter).
6. Make sure that you install the indoor unit in an area which provides easy pipe
connection with the outdoor unit, and easy drainage for condensed water.
7. Make sure that you install the indoor unit in an area which is large enough to
accomodate the measurements shown in figure on the next page.
Indoor Unit
1
Installation
37
00150A(2)-37~53 2/5/01 11:44 AM Page 37
To Next Page
Loading...
