Samwon Tech TEMI1000 Series - Page 19

④
⑤
[Fig. 3-9] Stationary operation #2 operation screen
17
(4) Stationary operation #2 operation screen
●Itisascreentodisplaythedisplaylampsformeasuringdata,settingdataandoutputvolume.
①
②
③
Itdisplaysthecontroloutputvolume(MV).The“ON”stateis
displayedinredand“OFF”stateisdisplayedindarkgrey.
●
 Settingthestatelampin[12.Systeminitialsetting]in[Installationmanual]
●
Settingupto24forlampin[12.Systeminitialsetting]
Itdisplaysthecontroloutputvolume(MV)intemperature.
Itdisplaysthecontroloutputvolume(MV)inhumidity.
ItdisplaysthecurrentlyappliedPIDgroupnumber.
●
 TheappliedPIDgroupcanbecheckedin[8.PIDgroup]in[Installationmanual]
Itdisplaysthetotalprocesstimeofstationaryoperation.
1
4
5
2 3
[Fig.3-8]Stationaryoperation#1expandedscreen
03. Operation state screen setting