Samwon Tech TEMI1000 Series User Manual

19
03. Operation state screen setting
(6) Termination screen for operation of stationary time setting
●Thestationaryoperationisterminatedwhileitshowsthemessage,“Thetimesettingoperationisterminated.”
whentheoperationisterminatedbytheelapseofsettingtimein[4.Operationmotionsetting]
●Themessageisnotappearedonthescreenwhenitisforciblyterminatedbypressing“Stop”buttonduringoperation.
●Themessageisdisappearedbytouchingthecorrespondingpartwhentheoperationterminationmessageisdisplayincaseofoperationtermination.
(Itissamewiththeprogramoperationtermination.)
[Fig. 3-12 ]Terminationscreenforoperationofstationarytimesetting

Samwon Tech TEMI1000 Series Specifications

General

Brand	Samwon Tech
Model	TEMI1000 Series
Category	Controller
Language	English