Samwon Tech TEMI880 - Sensor BIAS Setting

SAMWONTECH
4th Edition of TEMI880 IM : Jan. 29. 2007 Page 54 / 119
2.12.1.4 Sensor BIAS Setting
▶ This is the screen about sensor bias setting.
Figure 2-45. Sensor BIAS Setting – Humi. PT Figure 2-46. Sensor BIAS Setting – Humi. DCV
No. Contents Description Additional Description
○
1
DRY TEMP
DIFFERENCE
VALUE
Set dry temperature difference value.
○
2
DRY TEMP
REFERENCE
POINT
Set dry temperature difference point.
○
3
WET TEMP
DIFFERENCE
VALUE
Set wet temperature difference value.
○
4
WET TEMP
REFERENCE
POINT
Set wet temperature difference point.
○
5
BIASED DRY
TEMP PV
Set biased dry temperature PV.
○
6
BIASED WET
TEMP PV
Set biased wet temperature PV.
○
7
BIASED
HUMIDITY PV
Set biased humidity PV.
○
8
HUMIDITY
DIFFERENCE
VALUE
Set humidity difference value.
○
9
HUMIDITY
REFERENCE
POINT
Set humidity difference point.
☞ Humidity indicates relative
humidity.
○
1
○
2
○
3
○
4
○
7
○
5
○
6
○
8
○
9