Need help?Do you have a question about the Samwon Tech TEMI880 and is the answer not in the manual?
General| Input Type | Thermocouple, RTD |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Mounting | Panel Mount |
| Control Method | PID |
| Output Type | Relay, SSR |
| Display | Dual 4-digit LED |
| Operating Temperature | 0-50°C |
Purpose of the manual and explanation of symbols used.
Verifies all necessary accessories are included in the product package.
Guidelines for selecting location, environment, and mounting procedures.
Details on electrical wiring, grounding, and noise reduction techniques.
Explains the function of various buttons on the setup screen for operation.
Describes the process of entering numerical data values using the input keys.
Illustrates the fundamental processing flow of the controller system.
Details the screen displayed immediately after the unit is powered on.
Overview of the central screen for navigating various functions and settings.
Covers different operational states like Program Stop, Program Run, Fix Stop, and Fix Run.
Displays operational status and information during program stop mode.
Shows current status, set points, and timing during program execution.
Displays status and parameters when the unit is in a fixed stop state.
Displays status and parameters for the fixed run operation mode.
Allows configuration of operational modes, power settings, fuzzy logic, and slopes.
For setting and displaying reservation dates and times for operations.
Configures graph display options, including time scales and data selection.
Accesses various settings related to creating and managing operational patterns.
Allows detailed editing of pattern segments, including temperature, humidity, and time.
Configures pattern repetition, including start/end segments and count.
Manages pattern files, enabling copy, delete, and display operations.
Sets wait times and running times for time signal outputs.
Configures conditions for wait operations based on temperature and humidity zones.
Enables setting and managing names for operational patterns.
Adjusts screen brightness and controls the display of tuning buttons.
Central hub for configuring input, output, PID, alarms, communication, and display settings.
Configures sensor types, ranges, and compensation for temperature and humidity.
Sets up parameters for temperature sensor input types and ranges.
Sets up parameters for humidity sensor input types and ranges.
Configures how temperature and humidity values are displayed on the screen.
Allows fine-tuning sensor readings through bias and reference points.
Configures control output types, direction, and transmission output settings.
Sets parameters for SSR/SCR control output, including direction and cycle time.
Configures temperature and humidity transmission output types and ranges.
Configures ON/OFF signal actions and inner signal parameters.
Defines conditions and actions for ON/OFF signal outputs.
Configures inner signals, including range, item, type, and band.
Provides detailed settings for PID control, including auto-tuning and range configurations.
Sets temperature and humidity ranges for PID control and reference points.
Assigns specific PID parameter sets to different control groups.
Configures Digital Output (DO) relay assignments and parameters.
Sets up alarm conditions, types, and names for DI errors.
Configures various alarm types, points, and hysteresis behavior.
Assigns custom names to Digital Input (DI) errors for better identification.
Configures communication protocols, baud rates, parity, and data length.
Sets initial display content and configures status indicator lamps.
Allows customization of initial display elements like language and company information.
Configures which status lamps are active and their display behavior.
Screen for entering passwords to access or change settings.
Table summarizing operation settings, ranges, and initial values.
Table summarizing reservation settings, ranges, and initial values.
Table summarizing graph and data storage parameters and initial values.
Table detailing parameters for editing patterns, including segments and time signals.
Table outlining parameters for setting pattern repetition and linking.
Table listing parameters for file operations like copy and delete.
Table showing parameters for setting time signal ON and OFF times.
Table summarizing parameters for wait operation modes and times.
Table summarizing temperature input settings and their ranges.
Table summarizing humidity input settings and their ranges.
Table summarizing display input parameters for temperature and humidity.
Table detailing parameters for sensor range input correction.
Table summarizing control output settings.
Table summarizing transmission output settings.
Table summarizing ON/OFF signal parameters.
Table summarizing inner signal parameters.
Table summarizing PID range setting parameters.
Table listing PID group settings and parameters.
Table summarizing Digital Output configuration parameters.
Table listing alarm settings, types, and points.
Table summarizing DI error name settings.
Table summarizing communication settings.
Table summarizing initialization display settings.
Details communication parameters and specifications for RS232C and RS485 interfaces.
Shows terminal connection diagrams for RS232C and RS485 interfaces.
Explains the structure and types of communication commands for data exchange.
Describes the basic structure of communication commands, including STX, address, command, data, and checksum.
Lists self-information and read/write commands for interacting with the TEMI880.
Details the command for reading D-Register data in an orderly sequence.
Details the command for reading D-Register data randomly.
Details the command for writing D-Register data in an orderly sequence.
Details the command for writing D-Register data randomly.
Details the command for registering D-Registers for use.
Details the command for reading previously registered D-Registers.
Explains the structure and categories of D-Registers used for data communication.
Describes D-Registers related to process status and bit mapping.
Explains D-Registers used for operational functions like setting pattern and wait modes.
Details D-Registers for managing current and reservation times.
Explains D-Registers used for setting and managing program patterns.
To Next Page
