Need help?Do you have a question about the Samwon Tech TEMI850 and is the answer not in the manual?
General| Brand | Samwon Tech |
|---|---|
| Model | TEMI850 |
| Category | Temperature Controller |
| Language | English |
Manual introduction, product overview, and document usage guidelines.
Key safety precautions, protection guidelines, limited warranty terms, and policy.
Verify contents upon unboxing and identify included components.
Guidelines for selecting a suitable installation site and environmental conditions.
Specifications for external dimensions and panel cutout for mounting.
Step-by-step instructions for physically mounting the device.
Instructions for proper grounding and electrical wiring connections.
Detailed diagrams illustrating terminal connections for various models.
Wiring procedures for analog inputs, control/transmission outputs, and communication.
Information on auxiliary relays and communication wiring details.
Overview of setup buttons and how to input data values.
Details on using input keys for parameter and data entry.
Visual representation of the controller's basic processing flow.
Guide to navigating the initial, main, and operational display screens.
Detailed explanation of program run and fix run operational screens.
Configuration options for operational modes, key lock, and slope settings.
Settings for reserved operations, graph display, and data storage.
Setting up, editing, and managing operational patterns and segments.
Configuration for time signals, wait operations, and pattern names.
Settings for screen display, brightness, and system configurations.
Configuration of temperature and humidity inputs and compensation.
Procedure for setting sensor bias values for calibration.
Configuration for control outputs and transmission signal settings.
Settings for ON/OFF signals, inner signals, and their actions.
PID range settings, auto-tuning, and PID group configurations.
Configuration screen for digital output (DO) settings.
Setting up alarm types, points, hysteresis, and DI error names.
Configuration of communication parameters like protocol, baud rate, and address.
Settings for initial display parameters and password management.
Illustrative example showing pattern, inner signal, and time signal settings.
Tables detailing parameter ranges and initial values for operation, reservation, and graph settings.
Tables for pattern editing, time signals, wait operations, and input settings.
Tables detailing input/output configurations, sensor bias, and control parameters.
Tables for ON/OFF signals, inner signals, and PID control parameters.
Tables detailing digital output configuration and alarm settings.
Technical specifications for RS232C and RS485 communication.
Wiring details for RS232C/RS485 and the basic communication command format.
Details on commands for reading and writing D-Registers (RSD, WSD, etc.).
Explanation of D-Registers for process data and operational functions.
Details on D-Registers for reservations and program pattern settings.
To Next Page
