Environmental product declaration
- Ceramic lids are made of clays, kaolin and other natural rocks.
- Fully soaked ceramic lids take at least one day to dry at room temperature.
- Protect surface against grease, dirty water, etc.!
- When ceramic lids stop sucking water after time, grind the surface with sandpaper with grain size of
about 120
- Ceramic lids are subject to wear and can be purchased separately.
Pre-moistening of ceramic lids:
Before use it is necessary to moisten lids to about 10-50%. It is recommended to weigh the lid
completely dry and fully soaked and engrave the values in the corner of the lid. If the dry weight of the lid is
200 g and the weight of the fully soaked lid is 220 g, then 50% wet will be 210 g.
smartbreadmaker.com
- 24 -
SmartBreadMaker
To Next Page
Loading...