Installation
Table of Contents
Section Page Section Page
Introduction
Qualified Persons ..............................2
Read this Instruction Sheet ......................2
Retain this Instruction Sheet .....................2
Proper Application .............................2
Usual Operating Conditions ......................2
Special Warranty Provisions .....................3
Warranty ....................................3
Safety Information
Understanding Safety-Alert Messages .............4
Following Safety Instructions ....................4
Replacement Instructions and Labels ..............4
Location of Safety and Instruction Labels and Tags ...5
Safety Precautions ............................7
Shipping and Handling
Inspection ....................................8
Packing ......................................8
Storage ......................................9
Installation
Before Starting ...............................11
Installing the Mounting Pedestals
and High-Speed Base .......................12
Installing the Switch Operator ...................14
Installing the Pole-Units ........................15
Connecting the Pole-Units
to the High-Speed Power Train ................17
Connecting the Operator
to the High-Speed Power Train ................18
Connecting Conductors ........................19
Removing the Interrupter Containers ..............19
Setting up the Operator and Checkout ............20
Operation
Understanding Trip-Free Operation ...............26
Electrical Operation ...........................26
Manual Operation .............................27
Understanding the Gas-Pressure
Indicator and Safety Relief Device .............28
Understanding the Optical Remote
Gas-Density Monitor ........................28
Inspection Recommendations ...................28
S&C Series 2000 Circuit-Switchers
Outdoor Transmission (68 kV and 230 kV)
Model 2040 — With Horizontal
Interrupters and Without Disconnect
April 23, 2018
© S&C Electric Company 2002-2018, all rights reserved
Instruction Sheet 716-502