To Next PageTo Next Page
Need help?Do you have a question about the S&C Omni-Rupter Series and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Mechanical Life | 10, 000 operations |
| Continuous Current | 600A |
| Electrical Life | 100 operations at rated interrupting current |
| Enclosure Type | Outdoor |
Defines qualified personnel for installation, operation, and maintenance of electrical equipment.
Discusses manual operation, avoiding partial strokes, and checking blade position for safe operation.
Advises thorough reading of the instruction sheet and related materials for proper installation and operation.
Specifies equipment usage must be within its rated applications and parameters for reliable performance.
Details the exclusive warranty terms, conditions, and limitations of liability for the product.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE messages and their significance.
Provides guidance on seeking assistance from S&C or authorized distributors for unclear instructions.
Guides on obtaining replacement labels and emphasizes the importance of maintaining equipment labeling.
Illustrates the physical locations of various safety labels on the switch and provides reorder information.
Lists critical safety measures for operating Omni-Rupter switches at high voltage, including personal protection and procedures.
Details the contents of a standard shipment, including switch assembly, pipe sections, and hardware.
Outlines procedures for inspecting shipments for damage upon receipt and filing claims with the carrier.
Provides warnings and cautions for safely lifting, uncrating, and handling the Omni-Rupter switch.
Instructs on cutting vertical operating pipe to the required length, referencing erection drawings for dimensions.
Details drilling pole holes and securing the switch mounting bracket using through-bolts and washers.
Guides on lifting and positioning the upright mounting configuration switch onto the utility pole.
Explains the process for lifting and positioning the inverted mounting configuration switch onto the pole.
Provides steps for lifting and positioning the triangular mounting configuration switch onto the utility pole.
Describes how to securely attach the optional pole band to the switch mounting bracket and the pole.
Details attaching the universal coupling to the switch and the initial vertical operating pipe section.
Explains how to assemble intermediate pipe sections using splice couplings and guide bearings.
Guides on installing the operating-handle assembly and foot-bearing support plate onto the vertical pipe.
Details adjusting stop plates for the operating mechanism to remove play and ensure proper handle tension.
Introduces the phase-to-ground wildlife protection option to prevent animal contact and lists components.
Provides instructions for attaching base covers to the steel base of upright mounting configuration switches.
Explains correct placement of wildlife disks on insulators for 14.4-kV and 25-kV upright mounting configurations.
Details wildlife disk placement on insulators for inverted mounting configurations of 14.4-kV and 25-kV switches.
Describes fitting and securing the wildlife disk halves around the insulator using locking tabs.
Details completing wildlife disk assembly and installing the pole-mounting bracket cover for upright configurations.
Discusses dead-ending provisions, maximum loading limits, and requirements for conductor connections.
Provides procedures for preparing and connecting high-voltage conductors to the switch terminal pads.
Explains how to secure the operating handle using padlocks or by installing a key interlock mechanism.
Details the assembly and adjustment of the key interlock system for proper sequencing of switching operations.
Guides on checking switch operation, ensuring blade alignment and contact engagement in closed position.
Details checks for interrupter and shunt arm alignment and proper contact engagement during opening and closing.
Covers final checks on blade entry, shunt arm positioning, and contact clearance for proper switch function.
Provides step-by-step instructions for safely opening the Omni-Rupter Switch without hesitation.
Provides step-by-step instructions for safely closing the Omni-Rupter Switch without hesitation.
